Gas cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing carburettors.
The gas cable guide pipe has no thread on the underside.
Other carburetor elbows and throttle cables can be found in the accessories section.
Original BING spare part manufactured in Germany in original equipment quality.
Details
| Manufacturer | BING |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Angle | 45 ° |
| Carburetor type | 18 Catalyst |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 3.35
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 27 mm · Total length: 43 mm · Total length: 52 mm
EUR 14.30
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 50 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 40 mm · Height: 48 mm · Total length: 36.5 mm · Total length: 42 mm
EUR 14.30
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 40 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 30.5 mm · Total length: 37.5 mm · Height: 57 mm · Height: 67 mm · Width across flats nut: 7 mm
EUR 14.30
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.30
90° carburetor pipe bend M7x0.75
Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Angle: 90 ° · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 7 mm · Thread type: MF7x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Total length: 47 mm · Total length: 53.5 mm · Height: 29 mm · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.30
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 32 mm · Total length: 40 mm · Total length: 49 mm
EUR 8.30
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Width: 3.3 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Surface: blank · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Color: black · Color: silver · Ø outside: 2.6 mm · Ø outside: 4 mm · Total length: 12 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 3.35
BING rubber grommet Ø 8 mm carburetor pipe bend
Manufacturer: BING · Material: Rubber · Ø inside: 8 mm · Ø outside: 12 mm · Clamping diameter: 4 mm · Total length: 29 mm · Color: black · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.70
Collection only possible with online purchase and appointment.
