Special graphite exhaust gasket suitable for Alpa Chopper / Turbo / Bora cylinders, Malaguti Fifty mopeds with a Franco Morini engine, as well as Fantic Issimo & Yamaha Yamy mopeds with a Minarelli engine.
This special gasket is temperature-resistant up to 3000 °C. The material expands with heat and thus adapts to unevenness of up to 1.5 mm.
The gasket can only be fitted once, as it hardens after the expansion process.
Hole spacing: 38 mm
Ø inside: 24 mm
Thickness: 4 mm
A quality product made in Italy.
Details
| Place of use | Exhaust |
| Manufacturer | Made in Italy |
| Thickness | 4 mm |
| Ø outlet inside | 24 mm |
| Hole spacing inlet | 38 mm |
Suitable for the following models
| Fantic | |
| Malaguti | |
| Yamaha | |
| Franco Morini |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.90
swiing® ingenious gasket outlet (18 - 22 mm) graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3.4 mm · Reinforced: No · Ø outlet inside: 22.7 mm · Hole spacing outlet: 37.5 - 42.5 mm · Ø screw holder: 7.3 mm · Area of application: Standard
EUR 8.30
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.35
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 2.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
EUR 2.40
NTN 6203 C3 Ball bearing 17/40/12
Bearing type: Deep groove ball bearing · Stock number: 6203 · Ø inside: 17 mm · Ø outside: 40 mm · Width: 12 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard
EUR 10.70
Collection only possible with online purchase and appointment.
