High-quality Ø 90x17 mm brake pads with return tension spring for the front and rear drum brake on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect. Due to their uncompromising braking power, these brake pads are primarily used in racing applications.
Details
Slotted | Yes |
Manufacturer | swiing® ingenious parts |
Color | silver |
Springs included | Yes |
Ø locating bolt | 10 mm |
Width | 17 mm |
Number of springs | 1 pcs |
Ø drum | 90 mm |
Area of application | Racing |
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Ø outside: 10 mm · Thread length: 30 mm · Number of components: 3 pcs · Width across flats SW: 8 mm · Area of application: Special tool · Total length: 41.1 - 65 mm
EUR 19.90
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 3.40
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.90
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Ø inside: 25 mm · Bearing type: Ball ring · Ø outside: 36 mm · Ball bearing closed: No · Area of application: Standard · Width: 6.8 mm
EUR 9.60
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 14 mm · Bearing type: Ball ring · Ø outside: 27 mm · Ball bearing closed: No
EUR 8.40
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Ø outside: 10 mm · Thread length: 30 mm · Number of components: 3 pcs · Width across flats SW: 8 mm · Area of application: Special tool · Total length: 41.1 - 65 mm
EUR 19.90