Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 280 mm
Outer diameter of coil spring: 49 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Details
| Manufacturer | Xtreme |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 49 mm |
| Ø Fastening inside | 10 mm |
| Ø spars | 30 mm |
| Total length | 280 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Universal | |
| Tomos |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.30
EUR 2’630.00/l
MKX shock absorber 28 cm chrome
Manufacturer: MKX · Material: Platinum · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Ø outside: 46 mm · Mounting type: Nuts & bolts · Total length: 280 mm · Number of fixing points: 2 pcs
EUR 60.00
Moped fans like you also bought:
GPO license plate holder Inox
Height: 5.3 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Mounting type: Nuts & bolts · Total length: 145 mm · Width: 105 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm
EUR 13.10
EBR fork reinforced black | Puch
Thread type: MF26x1 (fine pitch thread) · Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Total length: 580 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread length: 57 mm
EUR 158.80
Handlebar fork plate 40 cm curved with chrome strut
Height: 400 mm · Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Width: 730 mm · Crossbar: Yes
EUR 42.00
Collection only possible with online purchase and appointment.
